Table Saw Ripping Jig
Cutting thin strips is a challenge. This simple shop-made jig and a few tips and techniques will guarantee safe, accurate results.
A lot of projects call for thin strips of wood. Sometimes it’s several thin strips to glue up into a bent lamination, or a couple to cover up some plywood edges. But cutting them can be a challenge. With this handy shop-made jig, you can cut either short or long thin strips safely and accurately on a table saw.
SELECT YOUR PLAN PACKAGE
- Metric (unavailable)
What You Get:
- 5 printable (digital) pages of step-by-step instructions
- 20 full-color photos, illustrations & exploded views
- Shop-tested tips and techniques
- Retail sources for hardware and supplies
Note: After your purchase, you will receive an email containing a PDF attachment of your purchased plan, as well as instructions for logging in to download the plan and access any other associated files and videos, which will all be located on this page.
We don't have any links to project supplies and hardware for this particular project yet, but here are some other products that might be of interest to you. (We may receive commission when you use our affiliate links. However, this does not impact our recommendations.)
Similar Woodsmith Plans
Dust-Free Blade Cover
Stop table saw dust in its tracks. All it takes is a weekend, some hardware, and an ordinary shop vacuum crevice tool.
Two router bits with template guides and a shop-made jig make three variations of this joint a snap.
The United States Customary System of Units (USCS or USC), more commonly referred to as the English or Imperial system, is the standard set of units for our plans. It uses inches and feet for measurement. This is the one you probably want if you are in the United States, and it is the one we have traditionally offered on this website.
The International System of Units (SI), more commonly referred to as the metric system, is the alternative set of units that we have available for some of our plans. It uses millimeters, centimeters, and meters for measurement. This is the one you probably want if you are outside the United States. These plans are provided by our business partner, Australian Woodsmith, and are based on the original Woodsmith plan. However, dimensions and other elements of the plan may vary between the metric and standard versions. Be sure to double-check the plan before building.