Rolling Storage Lockers
Pack a lot of storage into a small space with these cabinets on wheels. They roll side-to-side for easy access to items stored in the back.
This system takes little floor space yet creates a vast amount of storage in your garage or shop. From the front, they look like your average cabinets. The doors on the front enclose an easily accessible storage area fitted with adjustable shelves or pegboard. But what you might not notice are the storage areas at the rear of the cabinet on either side. These deep cubbies can be accessed by sliding the cabinets side-to-side on the large rollers. All you need is about two to three feet of space between the cabinets to be able to reach in and grab an item stored along the side. Though the cabinets are large, dado joints, glue, and screws make the assembly process foolproof. The main cabinet parts interlock for a solid assembly. The shop-made roller assemblies can handle over 2,000 lbs., so you won’t have to worry about overloading the cabinets.
SELECT YOUR PLAN PACKAGE
- Metric (unavailable)
What You Get:
- 11 printable (digital) pages of step-by-step instructions
- 40 full-color exploded views, photos and illustrations
- Materials list and cutting diagram
- Retail sources for hardware and supplies
Note: After your purchase, you will receive an email containing a PDF attachment of your purchased plan, as well as instructions for logging in to download the plan and access any other associated files and videos, which will all be located on this page.
We don't have any links to project supplies and hardware for this particular project yet, but here are some other products that might be of interest to you. (We may receive commission when you use our affiliate links. However, this does not impact our recommendations.)
Similar Woodsmith Plans
Dovetailed Router Bit Cabinet
Dovetail keys at the corners reinforce the joints to make a stronger cabinet. Plus, a clear plastic door panel lets you see what’s inside.
Great Garage Storage Racks
Using inexpensive materials, you can create a custom garage storage solution that mimics the look of high-end systems.
The United States Customary System of Units (USCS or USC), more commonly referred to as the English or Imperial system, is the standard set of units for our plans. It uses inches and feet for measurement. This is the one you probably want if you are in the United States, and it is the one we have traditionally offered on this website.
The International System of Units (SI), more commonly referred to as the metric system, is the alternative set of units that we have available for some of our plans. It uses millimeters, centimeters, and meters for measurement. This is the one you probably want if you are outside the United States. These plans are provided by our business partner, Australian Woodsmith, and are based on the original Woodsmith plan. However, dimensions and other elements of the plan may vary between the metric and standard versions. Be sure to double-check the plan before building.