15+ Power Tool Tips
The Woodsmith Technique Collection: 15+ Power Tool Tips will give you insight on how to make the tools in your shop work harder.
Make the most of your shop tools with these handy jigs, tips and techniques.
Includes:
- Drill press jig for drilling vertical holes in an edge
- Horizontal drilling on a lathe
- Band saw fence and support
- Spindle sanding jig for your drill press
- Four plans for mobile tool bases
- And many more jigs, tips and techniques
SELECT YOUR PLAN PACKAGE
Unit
-
$7.95
Learn more
-
Metric (unavailable)
Learn more
What You Get:
- 12 printable (digital) pages of power tool, tips and techniques.
- More than 50 step-by-step illustrations and photos
Note: After your purchase, you will receive an email containing a PDF attachment of your purchased plan, as well as instructions for logging in to download the plan and access any other associated files and videos, which will all be located on this page.
Product Recommendations
We don't have any links to project supplies and hardware for this particular project yet, but here are some other products that might be of interest to you. (We may receive commission when you use our affiliate links. However, this does not impact our recommendations.)
Similar Woodsmith Plans
Woodworking Tips
Bench Plane Restoration Guide
Learn to restore your vintage bench plane. From the experience of woodworking master Bill Anderson, you will be able to identify and repair five common issues woodworkers encounter with their bench planes.
Imperial Plans
The United States Customary System of Units (USCS or USC), more commonly referred to as the English or Imperial system, is the standard set of units for our plans. It uses inches and feet for measurement. This is the one you probably want if you are in the United States, and it is the one we have traditionally offered on this website.
Metric Plans
The International System of Units (SI), more commonly referred to as the metric system, is the alternative set of units that we have available for some of our plans. It uses millimeters, centimeters, and meters for measurement. This is the one you probably want if you are outside the United States. These plans are provided by our business partner, Australian Woodsmith, and are based on the original Woodsmith plan. However, dimensions and other elements of the plan may vary between the metric and standard versions. Be sure to double-check the plan before building.
Premium Plans
All of the information that you need to build our plans can be found in the standard plan. However, if you want even more granular detail to make your job easier, you should consider our premium plans. These come with additional shop diagrams that we drew when creating the prototypes. Shop drawings are not available for every plan.
