Pull Saw Miter Box

Cut small parts safely and accurately at any angle with just a few strokes of your pull saw.

Cutting miters on small moldings at the table saw can be tricky. First of all, it can be difficult to safely control the workpiece. And it’s not unusual for the saw blade to fling a small piece across the shop. This mitering jig lets you do the job without the risk. The jig is designed around a Japanese dozuki saw. Its fine, ultra-sharp teeth and thin blade make for super smooth cuts in small stock. Pairs of front and rear guide blocks sandwich the blade for making a perfectly straight, effortless cut while the workpiece is held firmly against the fence. The adjustable “turntable” lets you make cuts at any angle. For 45° miter cuts and 90° crosscuts, the turntable locks in place with an index pin. You’re sure to find yourself reaching for this jig over and over again.

SELECT YOUR PLAN PACKAGE

Unit
Tier

What You Get:

  • 10 printable (digital) pages of step-by-step instructions
  • 37 full-color photos, illustrations and exploded views
  • Detailed instruction for using Japanese dozuki
  • Materials list and cutting diagram
  • Retail sources for hardware and supplies

Product Recommendations

We don't have any links to project supplies and hardware for this particular project yet, but here are some other products that might be of interest to you. (We may receive commission when you use our affiliate links. However, this does not impact our recommendations.)

Jig & Fixture Bar

Forstner Bits

Titebond Molding Glue

Kreg Pocket-Hole Jig